What's up guys?
I'm Andy from 1A Auto.
In this video, I'm going to show you how to remove and reinstall the spare tire on the
tailgate of this 2010 Toyota RAV4.
If you need parts for your vehicle, click the link in the description and head over
to 1AAuto.com.
Now, on the backside of this cover, there's a zipper right here.
If the zipper is way down there, you're going to want to grab the cover and try to twist
it a little bit.
Although it's not really that easy, but tried to grab the zipper.
Unzipped the zipper.
With that unzipped, should be able to peel back this part of the cover a little bit.
Just grab the cover, grab it from underneath it, slide it out right from the tire.
Just work it back and forth.
Eventually, pull this off, just like that.
There's the cover.
We're going to have to take these nuts off right here, there's three of them, so we're
going to use the tool that comes with the car.
Open the cargo gate, and there's no tools, oh, there's tools.
Grab these tools right here, so we can pull these tools out.
And this is the tool we're going to use.
And loosen these up.
I don't think these have ever been off.
They're actually pretty difficult to remove.
Keep in mind there is a tire pressure sensor in there.
So you're going to want to make sure you always keep pressure in here.
You could have a tire light come on, on the dash and you check all four tires, and they're
fine.
And it could be this tire that's giving you the check tire pressure light.
Take those all off.
Now we can grab the tire, just slide it off.
Now take the tire, you want to line it up with the lugs right there.
Now, if you were taking one of the wheels off the car, you're going to want to take
the center cap off and the steel wheels fit on here.
I'm not sure if the aluminum wheels would fit on there, but this one has all steel wheels.
Take these lug nuts, re-install these.
Just take the tire iron snug these up.
And that's good.
And then we can put the cover back on.
So the backside, we want the zipper part at the top of the tire and the sewn part at the
bottom.
So just slide the bottom part in first.
Just try to pull this over just like that.
You can actually open the tailgate, and then you can grab it from the bottom and try to
slip it on a little bit more.
Push that over.
Now this zipper is a little bit messed up on this one, but normally the zipper is out
there.
Once that's in position, it's pretty good, make sure that bottom's around the tire keep.
Now we can take this part, and start zipping it.
That's what holds the tire cover on, is the zipper.
Obviously not this one.
This one's not too good, but hopefully yours is better.
There we go.
That's good.
Then we'll take the jack tools, slide them back into the bag and the tow hook is in here,
also.
If you ever need the tow hook to tow the vehicle, you can get that out of the bag.
Slide the bag back in position, right there.
There's no hook or anything that holds this one down and then slide this vent side down.
Two tabs.
Lock it in place.
Thanks for watching.
If you want the parts to do it yourself, check out 1AAuto.com, the place for DIY auto repair.