hello friends, today m going to teach you cutting of asymmetrical double shaded kurti
this is our top cloth piece and this is our shiny lining cloth by which we make designer kurti
the measurement is like this
front piece length 34"
back piece length(it is asymmetrical so it is in more length) 45 inch
shoulder to shoulder width 12 inch
shoulder length 7 inch
chest 35 inch
waist length 13.5 inch
waist 30 inch and 2 inch side because we insert pleats in this
hips length 19 inch
hips 39 inch and plus 2 inch more for inserting pleats in asymmetrical kurti
bottom width of kurti 34 inch
front neck length 6.5 inch
back neck length 4 inch
neck width 6 inch
this is our top part of asymmetrical kurti first we do drafting and cutting of this and then we place lining cloth and do cutting accordingly
first we do drafting of front piece
length is 34, mark 34+1=35 inch lengthwise because we insert a contrast color strip at bottom
from this 35 inch mark we do drafting of front piece
first fold cloth width wise equal to half bottom width + 1 inch i.e 34/2+1=18 inch
at length line take half of shoulder to shoulder length + 0.5 inch i.e 12/2+0.5=6.5 inch, mark it
now from this point mark shoulder length, i.e 7 inch lengthwise
cross mark at shoulder length point from width at 6.5 inch and take 6 inch, join these points to upper point like in suits drafting
now take 1/4 of chest +2 inch i.e 35/4 is 8.75 + 2 is 10.75, mark at 8.75 and 10.75
now from top take waist length + 0.5 inch i.e 13.5+0.5=14 inch, mark it lengthwise
without disturbing inch tape take hips length + 0.5 inch i.e 19 + 0.5=19.5 inch, mark it
now come to waist length and take 1/4 of waist + 2 inch + 2 inch(extra for inserting pleats) i.e 30/4+2=9.5 inch + 2=11.5 inch, mark 9.5 and 11.5
join the outer two marks of waist to the chest marks
at hips length, mark 1/4 of hips + 2 + 2(extra for inserting pleats) i.e 39/4+2=11.75 inch + 2=13.75, mark 11.75 and 13.75
now join waist marks to hip marks in A shape like this
now join outer hip mark to the bottom of kurti in a slant manner(cloth is already kept according to width)
length is 35 inch, so take 35 inch on slant chalked marked line from shoulder to shoulder width, mark it and make a curve
now do the front and back sleeves curving
mark half of neck width at top and make a slant line of 0.5 inch to shoulder length line
i will make a designer neck on this, so its cutting i'll teach you in some other video(you can make simple neck in this also)
cutting is like this, first straight then 0.5 inch slant then back sleeve curving and then outer marked line & then curve at bottom
now place the front piece on remaining cloth and mark it alongside it(width increased for back piece) and then extend slant line till required length
now place front piece till bottom of required length of back piece and do the curving
and cut the marked lines now for back piece
and after that do front sleeve cutting too
now we do the shaping of asymmetricl kurti
first place front piece on back piece matching sleeves round and half inch extra(front piece) above back piece at bottom
now we do shaping for making it asymmetrical
its up to what shape you want whether it is A shape, a bit like wave shape or S shape
we are A shaping it
for this mark 32 inch from top on front piece lengthwise, 31 inch ready +1 inch for sewing seam
now mark a slant line from 32 inch point to the other end like A shape(a little bit curvy)
we do the cutting of this from one end to 32 inch mark in a little bit curve manner
now after this, do round curving (a bit more curve) so it looks in a symmetry of front piece
this is our asymmetrical shape kurti cutting
now i'll adjust the lining cloth of front piece and back piece and do cutting of lining also
fold the lining cloth according to width of front and back piece and cut it alongside like this
this is our A shape symmetrical kurti cutting
in next video i'l teach you a new cutting/stitching in a simple way..thank you :)