Hi, DIYers.
Joe here from Alarm Grid.
And today we're going to talk about sensor
groups on the Qolsys IQ2 panel.
Now, sensor groups basically tell the panel
how the sensor is going to act.
If you've ever worked with a Honeywell panel,
the sensor response type will be the same thing.
So might bring up some memories.
On the panel today, we actually have two different sensors
that we're going to add to the panel.
And we're going to show you the different sensor group options
that you see.
One thing to know on the Qolsys IQ2
is that the sensor groups that you have available,
they may only show certain ones, depending
on what kind of sensor you do actually
enroll into the system.
So depending on the sensor type, that's
going to change what sensor groups you have available.
Also, different sensor groups are available
depending on which firmware you have loaded onto your IQ2.
So a good thing to do first is to upgrade it to the latest
firmware to make sure that you have all the available sensor
groups for whatever sensor you're going to learn in.
The first one that we're going to learn in today
is a regular internal logics contact.
This guy right here works on the 319.5 frequency, which
is compatible with our IQ2.
The other sensor that we're going to learn in
is actually a key fob, and this key fob
works on the Power G frequency.
That is an option you can actually have on the IQ2.
It's a daughter card that installs in the system.
And one of the good benefits, one of the major touted points
of the Power G is how far its communication
ranges from the system.
If you do you have any questions about Power G,
though, feel free to reach out to us,
and we'll be more than happy to explain
all the different features that you get with this technology.
Now, as we have a key fob, and we have a contact,
when we learn the [INAUDIBLE],, we're going to see two
different sensor types which are going to give us different
sensor groups--
as a good example.
So on our system, first we have to go into our sensor
enrollment screen.
So I'm going to slide down from the top, click
on Settings, Advanced Settings.
I'll do my default dealer code, 2222.
I'm going to do Installation, Devices, and then Security
Sensors.
From here, I'm going to do auto learn sensor.
And first I'll do the inner logic sensor.
And as you can see, because I moved the magnet away from it
and faulted it, it showed up in the system.
Just to make sure that this is the sensor,
though, I'm going to do that one more time.
And as you can see, we're getting
the same number for the serial.
We definitely know that this sensor
is learning into the system.
So I'm going to click on OK.
And as you can see, the sensor type
comes in as door and window, and the sensor group
comes in as number 10, Entry Exit, Normal Delay.
This would be useful if you're installing
this on the front door, or any door where
that you're going to go in and out of the house.
Now, if you click on sensor group,
you'll see that we have a whole bunch of other sensor
groups available for this particular sensor
type that we're learning in.
If we change the sensor type to, let's say, A Motion,
you'll see that our sensor group does
change two different options.
So if you're getting creative with your sensor installation,
and you needed to do a different thing based
on an arming setting, or something else with the system,
checking out the different sensor types can possibly
allow you to install the sensor in whatever situation
you're trying to install it in.
You're just going to want to make sure
that you know exactly what the sensor is doing when
you do program it in as such.
So let's go back.
I'm going to set this to a regular door and window sensor.
Entry Exit is fine.
Front door is good.
We'll leave it as that.
So I click Add New, and now the sensor
is programmed into the system.
Now, with Power G sensors, you actually
have to hold down the main button or the learn button.
It's going to flash.
It's going to turn off, and then the LED
is going to flash again, or illuminate,
and that's going to be when you release the button to learn
in to the system.
The key fob, we're going to use the panic button right here,
as this doesn't have a learn button on the back of it.
Again, if you have any questions about [INAUDIBLE]
a Power G to the system, feel free to reach out to us.
We'd be more than happy to help.
So I'm going to go ahead and press and hold the button.
We've got one light.
And now I'm going to let go when the light turns back
on and stays on.
So I let go now, and there we go.
We see the system did pick it up.
So if I click OK here, we'll see that our source says
Power G, which is what we want, as this is working on the Power
G frequency.
And you'll also see that the sensor
type is an auxiliary pendant.
And our sensor group is different from our contact
that we enrolled in.
Right now it's mobile auxiliary.
And if we click that, you'll see that you
have a whole bunch of different sensor groups
that will work best with the panic key fob
that we have here.
But we're just going to leave that as this and click Add New.
It's going to add in the sensor.
And then we go.
There's our two sensors with the sensor groups
that we want for these particular devices.
I'm going to go ahead and click the Home button.
They're both programmed in and ready to go.
If you have any questions about the IQ2 sensor
groups on the system, enrolling in sensors or Power G,
feel free to reach out to us.
Head over to our website, www.alarmgrid.com,
give us a call at 888-818-7728, or send us an email
to support@alarmgrid.com.
Enjoy the video, feel free to subscribe,
and if you want to be notified when we post future videos,
hit the notification button below,
and we'll send you an update when we do so.
Thanks for watching and have a great day.