Hi everyone, welcome back to geardo.
Today we will show you how to replace the Keyboard Connector on Microsoft Surface GO
2 Tablet.
Before Starting, we need the right tools to proceed with the repair, which You can find
in the description.
The most crucial aspect of tablet repair is Proper heating to separate the screen from
the body.
For this, we use a heating pad designed for tablets and mobile phones.
To remove the screen On Surface Go 2, heat the front side of the screen.
Select the Tablet heating option and leave it till the heating completes.
Alternatively, you can use a heat gun or hairdryer.
Once the heating completes, use a suction cup on the side to lift the front screen.
In between, Insert a Plastic Card pry tool or triangle pickers and cut the adhesive around.
Be gentle while pulling; flex cables are attached to the logic board.
Next, gently lift the screen and move it upwards on the table.
Next, undo two screws to unplug the battery connector.
Next, Flip the LCD Screen assembly.
Next, take out the connector bracket.
Next, Disconnect the LCD connector by lifting the lever.
Now can free the screen from the body.
Next, Clean the edges for unwanted adhesive parts.
Next, take out the not working keyboard connector module from the body.
First, Take out the bottom right shield.
Next, take out the memory card holder flex by lifting the lever.
Next, disconnect the keyboard connector flex by lifting the lever and sliding out the cable.
Next, Undo two screws holding the connector module.
Next, gently pry the cable, if needed, add some heat to soften the adhesive.
Next, place and secure the new keyboard connector module.
Next, add two screws to secure the module.
Next, secure the keyboard connector flex and the memory card connector cable.
Next, secure the shield.
Next, Secure the LCD screen connector to the board and then
the bracket.
Next, Secure the battery connector by adding two screws.
Next, power up the device for testing screen and touch functions.
Once the testing has passed, add new adhesive or glue to secure the screen to
the body.
Slide in the screen from the bottom to the top.
Gently secure the screen edges.
Just make sure to put pressure on the frame sides.
Next, add some binding clips or rubber bands to tighten the screen to the frame.
Leave it for some time and remove it.
I hope you have enjoyed the Repair guide.
Let us know if you have any questions; please like, share, and comment on our videos.
Remember to hit the subscribe button.