Hey DIY-ers, I'm Jorge from Alarm Grid.
Today, I'm going to be showing you guys how
to learn in a Versa GE Sensor with an IQ2 Plus Panel.
Now, before you go ahead and start learning your sensor,
you want to make sure that, first of all,
you have the correct IQ2 Plus Panel, because there's
about six different ones, and that you
have the correct sensor.
So the IQ2 Plus Panel that you have,
there's about six different ones.
The one that you're going to want to use
is the one that has a 319.5 daughterboard card built-in,
so it's the Interlogix and Qolsys daughterboard card
built-in.
There's two other ones that have Honeywell and 2GIG Legacy
daughterboard cards.
There's two other ones that have DSC Legacy daughterboard cards,
but the ones that you want are going to be one of the two
that have the Interlogix and Qolsys daughterboard card
built-in to it.
Now, they do have--
the reason I'm saying there's two different ones
is because there's an AT&T or Verizon one.
So, you just want to make sure that you just
have the IQ2 Plus that has the Interlogix and Qolsys
daughterboard card, or else this sensor
will not work with your system.
And when I go into the programmer screen,
I'll show you how to confirm that you
have the correct panel as well.
Now, this Versa Interlogix sensor,
it transmits at a 319.5 megahertz frequency,
which is what Interlogix sensors and most Qolsys sensors
work at.
There are two other versions of the Versa sensor,
there's 5800MINI, which is the Honeywell version of the Versa,
and then there's the Versa 2GIG sensor,
which is again the same sensor just intended for 2GIG panels.
The Honeywell one, the 5800MINI is also
a Versa sensor just intended for Honeywell systems.
Now, the one way to tell what sensor you have
if you already have them installed in the house,
if you moved into it and they're already there--
is you'll actually if you pop the cover you'll
see that the daughterboard card on the inside
is a different color.
So, for the Interlogix one they're actually blue,
but you can see by the actual blue box.
The Honeywell one, the 5800MINI has a red daughterboard card
and the 2GIG Versa has a yellow daughterboard card in it.
So right now, I'm going to go in and show you guys how
to pop the cover, show you guys how
to get the serial number in case you want to confirm whenever
you guys are learning it in, and how to just make sure
what sensor it actually is.
So, I'm going to go ahead and open up the box
and I'm going to take out the sensor
and I'll show you guys right now how to pop the cover.
All right, so first thing you're going to need
is a flathead nothing too big, just the perfect size.
There's about three little slots on the side of the sensor.
You can see I've already tried popping the cover off so
kind of like damage the plastic a little bit,
and then there's one on the very top.
So, what you're going to do is you're
going to try to pop at least two of them out.
So you put the flathead flat in twist, excuse me,
flathead in you're going to twist
and that pops one side off, and then if you pop the second one
off then it should pretty much the rest should come out
very easily.
Now, if you look at the inside, you'll
see it has the blue daughterboard card that
is the serial number, alpha 34 delta 61,
and it comes with a CR2032 lithium coin battery.
All right, so these guys are ever
looking at replacing batteries, all you guys have to do
is pop the sensor open and you guys can actually
get the model right off the battery
and replace it like that.
I'm going to go in and put the cover back on,
we've confirmed the serial number.
Popping the cover off is also going
to be another method that you can use to learn the sensor,
and I'll show you guys that as well when
we get to that in the video.
But first to learn the censoring,
we have to get the panel into programming mode.
All right, so easy thing about this panel and the sensors
is that they have an auto-enrollment mode feature.
All you have to do is put the panel in learning mode,
pop the sensor or fault the sensor,
and the panel automatically brings in the serial number
and we can actually confirm it with the sticker on the inside
of the daughterboard.
So I'm going to go in and wake up my screen, ooh,
that was a little too fast.
So, the first thing to get into programming
mode you're going to hit the little gray button up
at the very top of the IQ2.
You're going to go to Settings, right now
it's giving me an error because I don't have my panel connected
to Wi-Fi, if you have yours connected
you will not see this screen.
I'm just going to hit OK to skip past this.
I'm going to go to Advanced Settings.
To go into programming, to learn in sensors
you need to have your installer code or your dealer code.
The default codes that come with this system are 1, 1, 1,
1 or 2, 2, 2, 2, you or your company may have changed it,
so you want to make sure you are using the correct code.
So I'm going to use 1, 1, 1, 1, go
to Installation, Devices, Security Sensors,
and this is where--
before actually learning the sensor,
I'm going to show you guys how to confirm what panel it is you
guys actually have, all right?
So I'm going to go to Add Sensor,
and if you want to confirm which panel it is you have,
you see where it says source, if you open up
that dropdown it's going to give you the frequency that it has.
So, you see this one says 319, it's actually 319.5,
but they're just kind of abbreviating it.
So, it is a 319 panel, if you guys have the Honeywell one
you guys will actually see it says 345,
and if you guys have DSC you'll see it says 433, all right?
So, that just confirms that we do
have the panel with the Interlogix and Qolsys
daughterboard card in it.
So, I can go ahead and back out of this now,
and I'm going to do the easiest learning method, which is just
go to Auto-learn sensor, it says it is now in a learning mode.
Once you go into an Auto-learn--
once you go into that menu, the panel
is now listening for frequencies from different sensors.
As you see there, this one just picked up
on a sensor 1740 alpha 2, however,
when we looked at the serial number that was not
the case for this number.
So, it's picking up on a different sensor that's
probably being opened up somewhere on the office,
so I'm just going to go hit and Cancel,
because that's not the one I wanted to learn in.
If you see, I'll actually put the magnet close to this one,
I'll fault it, and now, the serial number
is exactly the one that we had seen earlier,
614 delta alpha 3, that's the one that
was on the sticker on the inside of the sensor.
If you want to confirm it, again, all you
have to do pop the cover off--
give me one second, and you guys will actually see--
give me one moment, 614 delta alpha 3.
So that's actually a little bit weird,
the serial number that the sensors picking up
has the exact characters it's just in a different order.
So I'm wondering if the sticker on this sensor
was printed incorrectly, but it does
have all the exact same characters, we're
going to go ahead and hit OK for now,
because this is a sensor we want to work with.
Now, when you go into this programming screen,
it is going to give you different options
that you can play around with.
So for instance, the first thing you're going to want to do
is again just confirm that sensor ID.
Let me actually confirm see if it's same
that was on this right now.
Yeah, so again, you'll see here is still
has the same characters, it's just in a different order.
I'm thinking that it was a misprint for this sensor,
but it did learn in when I did fault the sensor
or open up the cover tamper, and I actually
show you guys at the end of this video
that the sensor does work with the system.
So the first thing you to want to switch
or leave and/or confirm that it's set to is a sensor type.
Now, this is a door window sensor that I'm working with.
So normally I will leave it as a door window, but I do
want to show you guys different options if you're learning
and different sensors.
You have motions, glass breaks, key fobs, keypad,
auxiliary pendants, smoke detector, seal detector,
a whole bunch of different options.
Obviously, we're working with the door window,
so I'm going to leave it as the default door window.
The sensor group, it is defaulted
to the sensor group 10, so an entry/exit normal delay.
So, an entry/exit door is something
that you-- let's say a front door,
whenever you enter the house you need
a timer to start so you can get to the panel.
So you can disarm it without having an alarm go off
right away, that may cause false alarms if you set it
to a perimeter.
If you're putting this on a window,
you may want to set this to instant perimeter DW, so
a door window.
You'll see here they also have the entry/exit long delay.
so if you're putting this on a roll-up garage door,
or on an exterior garage door that you have to get through
and it's halfway around the house
and you need a longer time, this sensor
would give you that longer time.
Oh, I'm sorry when you're coming in through the door that's
further away you need more time to get to the panel,
so you would set it to a longer delay.
Instant interior door, this is basically the system go,
the sensor is armed as a perimeter
only when it's in away mode, and it actually
follows any entry/exit delays.
So if you guys arm it away, you guys walking
through the front door--
let's say like the garage exterior door
and you guys have to go in through the garage interior
door.
If you have this as an instant interior delay,
since you open up that garage exterior which
had an entry/exit hopefully on it, then
this would follow that entry/exit delay period.
If somebody just breaks into the garage
and opens up this door without faulting an entry/exit first,
then it makes the alarm go off right away.
Now, I usually like to stick to the normal sensor group
10, which is the normal entry/exit delay,
or sensor group 13 perimeter, this is just normally
what we work with.
I'm going to program this in as a window just to show you guys.
I'm going to change the sensor name, I can do front door,
kind of gives you a couple of different options here,
but if you want to enter in your custom description
you can go ahead and do that as well.
Like let's say I wanted to enter in Alarm Grid,
hit the green check.
Now, if I ever fault the sensor, or if the alarm goes off
the sensor will report as Alarm Grid, that's
the name I gave the sensor.
You can change the chime if you want,
there's a lot of different options in here.
I'm going to leave it as high wire which
again is the defaulted.
You can enabled or disabled the voice prompts,
so if you don't want this sensor to announce the name,
Alarm Grid every single time, you can actually switch it
to off, it'll still chime but it just
won't do the voice enunciation.
And the security source, we're going to leave us 319.
Give me just one second here.
So yeah, so we're going to go ahead add new.
Sensor added successfully.
Now, we're going to back out to the home screen
by hitting the Home button on the bottom task bar.
And now, you'll see if I pull my magnet close to the sensor,
and I fault it.
Alarm Grid open.
It'll say Alarm Grid open.
All right, and you'll see the little link right here,
is letting us know that it's opened.
If I go ahead and close it, it should disappear,
and now it's no longer active.
But if you do go to All, this is where you can actually take
a look at all your sensors.
So if you have a bunch of sensors
they'll all appear here, and the ones that are open
will show that broken circuit or the broken link right there,
and again, if you close it, it'll close.
Now, I set this--
Alarm Grid open.
-- As a window, and I set as a perimeter,
which means while the system is armed, and if I fault it,
even while it's arming, it will cause the alarm to go off.
Take a look.
So let's just arm the system.
Select arm system type.
Let's just say I do an Arm Away.
Away mode selected.
This is a parameter, which means whether the system is in an arm
mode or arming states, if I trip it
right now while it's in the countdown you'll
see the alarm will go off.
System is now disarmed.
All right, so the sensor works, it is armed that's a perimeter.
You can obviously changes to an entry/exit,
if you're putting it on your front door, back door, side
doors, or anything like that.
But this was just a quick video on how to learn in the Versa GE
Interlogix sensor.
If you guys have any questions, feel
free to email us at support@alarmgrid.com
If you find the video helpful, make sure
you hit Like on underneath.
Subscribe to the YouTube channel and enable notifications,
so whenever we upload new content, you guys get notified.
I'm Jorge, and I'll see you guys next time.