[Music]
In this video we'll cover how to set up
your Canon Pixma MX922 Printer on a
wireless network using a Windows®
computer and Wi-Fi protected setup, or
WPS®. Let's get started!
Before connecting your printer to the network, confirm that
your wireless router is available and
properly set up. Also, confirm that your
computer is connected to the network.
Make sure your printer is plugged in and
turned on. The blue light near the Copy
button will be lit when the printer is on.
Press the Menu button.
Using the Four-Way Arrows to the right of the
display, select WLAN Setup and press OK.
If a WPS® enabled router is detected
you will see this screen.
You may see a button that looks like this on your
wireless router. For details on the
location of the WPS® button on your
router, refer to the router's manual.
Now press and hold the WPS® button on your
wireless router.
Then press the OK button on the printer
This must be done within two minutes of
pressing the WPS® button on your router.
The printer will attempt to connect to
your network. Once the printer is
successfully connected, press OK.
Then, press the Copy button to return to the
main screen.
Now, let's install the software.
Download the installation files
from the Canon website by visiting
usa.canon.com/support
In the search box located on the middle of the
web page, enter the printer model.
Select your printer from the drop-down results,
and click the Go button.
Your computer's operating system and version will be
detected.
If you need to change it, select it from
the operating system drop-down menu.
Now, follow these links to download the MP
Drivers for your printer.
Open the downloaded file on your
computer to get started.
On the welcome screen, click Next.
Select your place of residence, then click Next.
The License Agreement screen will be displayed.
Click Yes.
The drivers will now be installed.
This may take several minutes.
On the Connection Method screen
select use the printer with wireless LAN connection.
Click Next.
Confirm your printer model is selected then click
Next to continue with the installation
The software will now be installed.
This may take several minutes.
When you see this screen, confirm your model and
wireless network are shown, and then
click Complete.
Software installation has completed.
Now we'd like you to perform a test print from your computer.
Go to the Control Panel.
In the Control Panel screen, go to hardware and sound and
click on View Devices and Printers.
Your printer should have a green circle with
a check mark next to it
right-click the icon for your printer
and select Printer Properties from the
menu that appears.
Load plain paper in the printer.
Begin by pulling out the lower paper tray.
Next, move the paper guides so that a standard
eight and a half by eleven sheet of
paper will fit into the tray.
Stack the paper neatly, place it into the tray and
move the lower paper guides that it's
aligned with the LTR line
Adjust the side paper guides that it's flush with
the paper's edge.
Slide the paper tray back into the
printer. Then, open the outer cover and
extend the paper output tray.
Then, click on the Print Test Page button.
Congratulations!
This completes the set up of your Canon
Pixma MX922 Printer to a wireless
network using a Windows® computer and WPS®.
Now you're ready to print or scan.
For help with connecting your printer to a
Mac please visit our Youtube Channel for
more videos. Thank you for watching!
[Music]