What's up everyone this is KeN.
I'm back with another accessories video from a sponsor TAUTO.
TAUTO was very nice to send me another accessory
which is the Model 3 and Model Y phone holder and it's actually wireless.
And what we're gonna do is unbox it and install it and just kind of see how it is.
Let's get this unboxed and see what's in it!
Do it from the side it looks like this.
All right on the top should be where it holds your sun shades and everything.
And look like it's..
like that soft-touch type material.
You have your cables.
You have a little microfiber.
And you have the Instructions as well.
So we'll put that to the side.
And also this as well.
So that to the side.
And here is your phone holder of course.
So that looks pretty nice.
At the very bottom you have where you plug-in and this is the wireless one.
You do have a choice between the non-wireless and the wireless, but this one is the wireless.
And below that....
Looks like this is the base.
It has little felt-touch type material that does not hurt your display or anything like that.
So that's really good.
Very last thing are the two knobs.
And you have a choice between the left side of the display and the right side of the display.
So that's pretty much it and now what we're going to do is get it set up.
Okay so the first thing what I want to do is just get this groove.
I want to do it on the left side.
So it has...
a little joint that goes on top of that there.
So i'm going to just slide it.
And this is ABS Plastic which is good.
So that's on there so this is where this is going to go on the little joint.
All right snaps right on.
Then I'm going to screw it.
Even though I'm not going to screw it all.
Then you can wiggle it like that.
Look like it's not going to go anywhere.
So that part is pretty much done.
And then you can keep this one for if someone..
if your passenger needs to use it or something like that, so.
Then the last thing we're going to do is connect this part.
As you can see there now that's on there.
So that's pretty much set up.
Now we're gonna do is hook it on to the display and see if the charging function works.
Okay so I'm just gonna grab this
and then it should put it at the top.
And it slides right there.
The only thing I don't like about it is..
it's just like two different colors.
I wish it was like the same color as the actual display but that's okay that'll be just fine.
But yeah this is how it will look if someone's looking in your car kind of from the back.
Let me give you another angle.
So this is another angle how it looks.
If I want to take it up I mean it's on there .
You just kind of push up a little bit on each side.
But I'll show you how it goes down from this angle how it's applied.
Just fit it right there.
You press it down.
And you have to press it down a little hard.
It's kind of how it looks.
What do you think does it look okay?
$29.99 for the non-wireless where you have to probably still plug it into your phone
or you can choose this option and get the wireless one.
Which you still plug it into the base that I showed you in the unboxing.
But!
You don't have to plug anything into your phone it will recognize it.
We'll test that now.
Use this plug it into your cigarette lighter.
But since I have this product that TAUTO sent to me
Hub Docking Station.
I'm just gonna use this and just see if it will charge my phone.
Bottom of this is USB-C so I need to plug this regular USB in.
So you know it's getting power.
And then what I'm gonna do is just plug it in to the bottom.
Now it's plugged in.
I got my iPhone and then I'm just going to see if it'll charge it since it is wireless.
And the phone is charging.
And of course you can figure out a way to make this look a little bit better if you want.
But it's good to have.
You can do n avigation you can turn it landscape.
Makes a little sound there is a little gap but the phone is not going anywhere.
And it's not going to scratch your phone up at all because it's like that soft ABS Plastic in there.
So that's really cool.
I'm thinking that it's going to cover a little bit of how fast you're going, the speed.
So I want to test that and I'll probably put that in this video as well.
You can see it's kind of covering that part right there.
See you don't really see it.
Second thing I probably don't like about it.
But of course if you're rocking AutoPilot or anything like that.
You don't really have to worry about the speed limit.
So is it worth it?
You tell me.
Really like the product it's not bad.
You won't see it in Full Self-Driving videos or anything like that.
I don't want anything in the way, I want a pretty much clean interface.
But for long trips yes definitely it will work perfectly for that.
Hit that Like button
and hit that Subscribe button if you see fit.
And also hit that Notification bell as it will notify you when I do post new videos.
This is YouTubeKeN, I'll see you in the next video!