Hi everyone,
Welcome back to geardo,
Today we will show you how to replace the battery on the google pixel 6 mobile phone.
To start, we need the right tools to proceed with the repair, which You can find in the description.
The first step is to remove the LCD screen from the front.
To remove the screen, it needs to heat gently
around the screen cover edges until the pasted adhesive becomes soft.
For this, we are using a heating pad.
Place the front screen side on the heating pad. Select the mobile phone heating option and leave
it till it completes. Alternatively, you can use a heat gun or hairdryer.
Once you feel the heating is enough, use a suction cup to lift the screen from the right-hand side.
Create a small opening and insert a plastic card pry tool or something
similar to cut the adhesive around the LCD screen.
Be gentle in this process; the flex connector cable is on the left-hand side of the screen.
Always use the edge of the plastic card pry tool to avoid internal damages.
Next, Lift the screen gradually from the right-hand side to the
left-hand side and keep it like an open book.
Next, take out the connector bracket using a tweezer.
Next, disconnect the lcd connector plug from the board. Now you can free the screen from the body.
Next, undo nine screws on the logic board bracket.
Next, gently lift the bracket by loosening the graphite tapes.
Next, disconnect the battery connector.
Next, apply some heat to the battery and then gently pry the not working battery from the board.
This process may take time and might need extra heating.
While pulling out,
relax the tape on the bottom of the battery.
Next, install the new battery with adhesive
and secure the tape on the bottom.
Next, secure the battery connector.
Next, place and secure the board by adding nine screws.
Next, connect the lcd screen for testing.
Once the testing passes, secure the connector bracket.
Next, Before securing the LCD Screen, ensure it has enough glue;
if not, use B7000 glue or a new double-sided LCD adhesive.
Gently slide in the screen from the bottom and then to the top.
Slightly apply pressure on screen edges.
Finally, we are adding bonding clips to fasten the lcd screen. Leave it for some time and remove it;
if not, use some rubber bands to tighten the screen to the body.
I hope you have enjoyed the replacement guide.
Let us know if you have any questions. Please, like, share, and comment on our videos.
Remember to hit the subscribe button.
Please support us in creating more repair guides for the community.