This video will explain how you can re-assign functions to different controls by reconfiguring your CommandARM™.
Different operators, often wish to have controls set for their personal liking.
Different control settings may also be desired to make operation of different implements more efficient.
In this video, we will also show you how you can save these settings in a profile for each operator or implement.
At Key On, first acknowledging any messages.
Then touch the Controls Setup button located on navigation bar.
When Controls Setup page opens, each control and what function it operates will be displayed.
If you wish to build your own personal assignment, touch the “Custom” button.
Now decide which controls you wish to reassign.
For this example, we will reassign the number 6 SCV, so that we can control it with the number 2 SCV control lever.
To do this we first touch number 2 SCV to select it.
Then touch “Remove Assignment” to remove the number 2 SCV assignment from this lever.
Touch “OK” to confirm removal of this assignment.
Now notice that number 2 SCV control lever, no longer has a function to control.
Touch this number 2 control lever function area, to add your new assignment.
On the “Select Function” page, scroll down to locate and then select the number 6 SCV.
Notice now number 6 SCV is assigned to our number 2 control lever.
However also notice our number 6 control lever no longer has a function assigned to it.
To assign it a function, we simply touch number 6 function.
We then locate and choose the number 2 SCV that was previously removed.
Notice now number 2 SCV is now assigned to the number 6 control lever.
Once all control levers are assigned to functions we desire, touch “Save/Load”.
Then touch “Save Current Settings” to save.
A box then opens asking you to select settings you wish to save.
Because these control lever assignments we re-configured are located on the CommandARM™,
we must locate and place a check next to CommandARM™.
Also, if settings were made to SCV flow and detent times on the SCV page of CommandCenter™,
place a check next to SCV to save these settings.
Likewise, if changes were made on Transmission page or any other page of CommandCenter™, place a check next to those areas to save each setting.
Then touch save.
You can then enter a name for this saved configuration, this will make it easier to locate and reuse next season when this same implement is connected.
Touch “OK” to complete.
Notice our Custom settings are now saved as we had previously selected.
Close the Controls Setup page.
Notice that our number 1 control lever controls the number 1 SCV, while the number 2 lever controls SCV 6.
You are now ready to go to the field.
After a Key cycle, if Custom settings were previously used, the operator is notified of settings changes.
This is accomplished by the Controls Setup page being displayed.
In addition, also notice the number 2 and number 6 control levers are grayed out.
If the operator wishes to continue using these Custom settings, simply touch the “Custom” button.
Then close the Controls Setup page.
If however, a different operator is using this tractor, or tractor is connected to a different implement. Controls can easily be set back to factory default settings.
Once Key is cycled back ON, you are again notified of custom settings by the “Controls Setup” page opening.
Touch “Defaults” button to return tractor to factory defaults settings.
At “Restore Controls Defaults?” page, touch “OK”.
Factory default settings are now restored on this tractor.
Notice now, the number 1 SCV control lever, controls SCV number 1, Number 2 controls SCV 2, and number 6 now controls SCV number 6.
If at any time you wish to change back to one of your previously saved Custom settings, touch the Controls Setup button on navigation bar.
Touch “Save/Load”.
Select your previously saved Custom settings and then touch OK.
Touch “Settings Selected” to choose all previously saved pages.
Then touch OK.
Once settings are loaded, touch OK.
Your previously saved configurations are now available.
Close the Controls Setup page to return to tractor run page.