First, we create the stage
Next, we add 10 strips all at once and we'll edit each one as needed after
We can select the vertical direction right here
We'll change the number of LEDs later
ELM supports many pixel types
Select the DMX settings to fit your setup
We have 10 identical vertical strips. So we need to resize them and edit the number of LEDs.
To edit strips, you can select them in the list
Hold the mouse down to select multiple strips or press the ctrl or the shift key
You can resize all selected strips at once by clicking the resize handle
Now that we've resized a few strips, we need to specify the correct number of LEDs
You can see individual LEDs by using the zoom tool and putting your mouse over a LED
Another way of selecting multiple strips is by pressing the shift key and clicking on the stage
To precisely resize the strips, you can use the offset/resize tool
TIP: Right-click in a numeric box and move the mouse right-left to quickly change the value
Press the shift key while moving a control point to align it with the previous point
Now we'll specify the number of LEDs for the remaining strips
There's one problem: DMX addresses aren't continuous because of our changes
To fix this, select all strips (ctrl-a)
Then click the edit button and we'll look at the DMX settings
Press the re patch button to recalculate all DMX addresses and make them continuous
Now all strips are patched one after another as expected