Getting started Dyson V12s Detect Slim Submarine™ *Product details may vary
Register your machine.
Assemble your machine.
Charge your machine multiple ways.
Place your machine in the wall dock.
Or just the battery.
Plug straight into the mains.
Illuminated cleaner head.
Start your cleaning with vacuuming.
Turning on the Illuminated cleaner head will reveal debris you wouldn't otherwise see.
A piezo sensor in the cyclone detects the quantity and size of particles as you clean,
and displays them on screen.
In Auto mode, suction power then automatically adapts to the amount and size of particles detected.
The graph will stop rising as rapidly when a deep clean has been achieved.
Use the wet roller head after vacuuming.
Hold the wet roller head at the edges, press the red Quick-release button and allow the removable cassette to slide out from the main roller head.
Remove the roller from the main roller head.
Open the water reservoir.
Fill to the top with clean water.
Slide the cassette back into the main roller head until it clicks into place.
Refill the water reservoir before water runs out.
Return the wet roller head to the drip tray as soon as you've finished cleaning to prevent any spillages.
Hair screw tool.
Boost mode.
Empty the bin when the dirt reaches the MAX mark. Detach the wand.
No-touch bin emptying.