Hey, DIYers.
I'm Jorge from AlarmGrid and today we're
going to be going over how to default a Simon XT system.
So couple things, defaulting a system--
the Simon XT is going to do a couple of things.
It's going to go ahead and first of all
it's going to get rid of any user
codes that are in the system right now.
So right now, my master code I have a set of 5555.
Yeah, so that's four fives.
So that's my master code on the system right now.
When I defaulted that code will be deleted.
Any system settings that you have configured whether it's
anything in the deep level program
that you want to change for the monitoring station or anything
like that will also be deleted.
Any zones, door, windows, seals, smokes, any possible security
zone that you have learned to the system also going
to be deleted.
It's going to go back to normal back as if it was
brand new, just out of the box.
As far as programming goes, right.
So just to show you guys real quick
that the master code is currently set to 5,
5 I'm going to go ahead and arm it.
Motion, doors and windows on, motion on.
If I hit disarm.
Enter access code.
I'm going to enter my 5555 because that's
what I have is set to.
Disarmed.
Now the default one is 1234.
If I tried 1234 it would not work.
Enter access code.
See it doesn't work.
Disarmed.
So when I default it my 1234 will work
and my 5555 will no longer work.
Real quick, if you're looking at the video easiest way
to disarm it is while the system is powered down you hold down
these four buttons 1, 2, 3, 4 as you power it back on that's
going to default the system completely right away.
Now to do that, to power down the system,
the first thing we need to do is unplug the backup battery,
remove the transformer.
So to do that press these two tabs at the top down,
swings the panel wide open, you'll see the backup battery
right here.
I'm going to go ahead and remove it completely.
So I'm going to pull this tab away
allowing this backup battery to slide right out.
Going to remove the leads Yippa, sorry.
And we can go and places off to the side for now.
Yep, we can on and leave that.
I'll get to this in a second here.
So the next, we've unplugged the backup battery,
now we have to unplug the transformers.
So they're usually plugged into one of your wall outlets.
I have mine plug behind here, so I'm just
going to go ahead over here.
Now, you'll see the blue lights on.
As soon as I power down the lights will turn off.
So the system's no longer powered
on it doesn't react to any of my button presses whatsoever,
there's no power to the system.
Now at this point, if you have a cellular communicator
right here, this would be the point
where you want to unplug it.
Yes, so you're going to remove the cellular communicator,
if you have one.
We need to remove it before we default it.
So while the systems power down, you
have backup battery unplugged, transformer unplugged, systems
on, uh system is off, remove the cellular communicator.
I'm going to go ahead and place it back on its back plate.
All right, I didn't plug the backup battery back in because
like I said you don't need it for this process.
Now you may need two people for this
as holding down these four buttons
with one hand can be a little difficult.
I'm going to go out and attempt it in this video.
So, again, you want to make sure you hold down these buttons
before you power it back on.
So I'm going to hold down 1, 2, 3, 4.
In one moment there we go.
1, 2, 3, 4.
Powered on.
The panel beeps.
It is fully powered on now.
And now if I arm it, first of all, remember,
there's no zones into the system because you just defaulted it.
So it's going to allow me to arm because I don't have anything.
Doors and windows on, motions on.
But now, if I try to use the code that I had before,
which was 5555, it will not work watch.
Enter access code.
Everything's defaulted, so I need to use the default master
code, which is 1234.
Enter access code.
Disarmed.
The panel is defaulted.
Its back to its normal codes.
There's no zones learned into it and you have
a brand fresh Simon XT panel.
At this point in time, if you do have a cellular communicator,
since the panel is defaults and now all you need to do
is power down the system.
So just unplug the transformer again, open it up,
plug-in the cellular communicator.
You can also go ahead and plug-in
the backup battery as well now, and just
close the system backup.
And you have a defaulted Simon XT system.
All right, guys now just on a side note,
if you guys have done all the steps in the video
to default your Simon XT and it still did not function
or there's some settings that you still can access.
If your dealer code wasn't defaulted there is actually
a feature that is on the Simon XT
is called a phone lock feature.
Now by default this phone lock feature
comes disabled on the system.
However, there are some companies out there
that will enable it.
Now there's a list here of what all the certain features
that the phone lock will deny you access to.
Now these are very important features.
Because for instance, if you are using the Simon XT
and you're using it on a phone line monitoring
using a plain old telephone service if the phone lock
feature is enabled and even if you guys do
try to default the system to edit the setting in the system
where you can change the phone number that the system
dials out to that phone lock feature needs to be disabled.
If it is enabled you won't be able to get into that setting
to switch companies so that the system can dial out
to a different central station.
So again, make sure you're taking a look at the list
if the default doesn't work it's quite possible that the phone
lock feature is on and the phone lock feature is
only something that can be accessed
by having the dealer code.
The whole point of the video was to default the panel
so you can get your code.
So if the default is in working you're
not going to have your codes to be able to check the setting.
And if you do have your dealer codes
then it's just a setting that can easily be switched
by yourself in the programming.
All right, so if you do have your dealer code,
then you can easily access this phone line or this phone lock
feature by using these top arrow keys right here,
you're going to go ahead and hit the down arrow key until you
see system programming.
You're going to hit OK.
You're going to want to enter in the dealer code.
Now if your codes are defaulted, you're
going to want to enter in 4321.
Ops sorry it backed out it took too long.
Again, system programming OK.
4321, OK.
Now from here you're going to go to security.
You're OK.
And then you're going to scroll down until you see phone lock.
Now obviously my phone lock is set to off.
If yours is set to on it--
if yours is set to on make sure that you select and you set it
to off.
Now again, that phone lock feature
is very important so you guys can actually go in there
and switch the phone number that the system is dolling out
to or some of the other settings,
which you guys saw on the list previously.
All right, so from here we're just
going to back out to the main screen
by hitting status all the way out
and we're back out our main disarm screen.
If you guys have any other questions,
you can always email us at support@alarmgrid.com.
Make sure that you hit Like, if you found is very helpful.
Subscribe to the YouTube channel and enable notifications,
that way whenever we upload new content you do get notified.
Again, my name is Jorge, I'll see you guys next time.
Bye.