all right what is up guys I have been looking forward to shooting this video
for a long time so let's jump right into it so today I'll be Cera coating the
brake calipers and master cylinders and a burnt bronze color and will be paired
up with these parts over here which were done in a tungsten color in a previous
video also in that previous video I was talking about welding up the master
cylinder sight windows so I sent these out to trick engineering and they did a
really good job at closing those off that way I don't have to worry about
them breaking and I can safely seracote them and on top of that he was nice
enough to sandblast them for me that way they're ready to go for seracote before
I start the prep process there's a little touch I want to add to this front
brake caliper so some of the works brakes have a machined face so that's
what I want to try to do with this one I've got a rubber sanding drum over here
on the buffer as I'm sure most of you have seen in previous videos I'll show
you what it can do
well that turned out pretty sweet exactly the look I was going for now the
first step to prep for seracote is to haul these over the sink and clean them
up with simple green degreaser
next up I'll be soaking the parts in acetone for 30 minutes before I knock
off the sandblasting there's a few areas that need to be taped off mainly inside
the piston bore here on the calipers
I've got everything taped and plugged off just got a blast the calipers now
now the parts are ready for our preheat through the oven at 300 degrees if you
guys enjoy watching the videos make sure you support the channel by heading over
to prime em XCOM and picking yourself up a t-shirt hat and I've got stickers over
there as well alright these parts should be out of the oven pretty soon here the
parts are finished up with a preheat and once I have the seracote materials mixed
up the gun I'll be all ready to spray
and back into the oven we go for keyring it'll take an hour at 300 degrees while
those parts are in the oven I figured I'd run this by you guys so since I
started doing seracote videos I've been getting a lot of questions asking if I
can seracote your guys's parts unfortunately I don't offer that but
thankfully I know someone who's really good at seracote work Clayton
over at trick engineering is the guy to go to for any seracote work or welding
like I had done on those master cylinders his website is tricky and
g.com I'll also put it down below
alright guys check this out this color turned out amazing super stoked with it
just one minor issue I was being an idiot and I bumped into the caliper here
other than that really really happy with them man
I cannot wait to get these brakes back together that bronze is gonna look so
sweet combined with the tungsten color so I've got everything here to
completely rebuild the brakes stay tuned for that video coming out within a few
days if you're new to the videos and you would like to see more don't be afraid
to go hit that subscribe button as always thanks for watching everyone see
ya
you