Hi everyone, I'm Edward Munoz and today I will show you how you can create this
beautiful St. Patrick's design. I hope you are ready, this is a beautiful and
amazing technique. Are you ready? I'm ready! We need to start with a hand pump
and an 11 inch onyx black balloon, 20 pumps. We hold one balloon and we blow
up the other one. When you have these two balloons, just tie together, wrapping
around two times, one two and tie. When you have one duplet and you have the order duplet,
just connect in the middle and twist two times, one two. This is your quad.
I have this quad that we just made with 20 pumps and I have this quad just
with 10 pumps. We will tie together. Just hold one neck of the bottom quad with your
hands and put the other quad on top. Your neck goes up and just twist two times, one, two, and that's it.
But if you want to make sure your quads are together, just tie.
This is your base. Now, I made a water balloon and I will tie that water
balloon on the bottom of my quad, like that. And that is my weight.
It's time to inflate the black Orbz™. You can use the hand pump or you can use the Premium FoilPro®
Remember, you need to put in air until all the wrinkles disappear.
With a piece of 260, we will roll it down all the neck and tie two times, one and two.
We will tie together this balloon with the base.
We will add more stuff here on top, but for that, we'll need Grip Tabs and packing tape.
We will use two Grip Tabs. One in that position and another in the other position
and with a piece of 260, we'll pull through both Grip Tabs.
I will show you right now. One Grip Tab is on this side, we're working on this
side right now, and now, going to the other side.
You have one Grip Tab here, over here, and now, before we pull through with the 260, we will put pieces of regular packing tape around.
And I will put one more here.
With a piece of 260, we'll tie two times, one and two. This will be your
connector for the top. I will add an air-filled balloon.
And with a piece of 260, we're rolling down all the neck and tie two times.
This piece of the 260 we will tie here with these pieces of 260 and we'll cut the excess.
Show you here. To make stable that balloon 18 inch, we will make a quad with
5 inch balloons, gold. One two three.
One two three, one two three.
We will put this quad here on the bottom of this 18 inch balloon.
With a 260 or 350 black, we will put one all around here on the top, one black balloon.
You make a bubble and with this bubble, make a pinch twist.
We connect this balloon with a pinch twist. You can shape it a little bit. That will be the back side.
To make sure this 350 stays there, we will use Oasis UGlu Dashes to stick the 350 or 260 with the Orbz™.
We will add more gold balloons around. They don't need to be all the same size.
Just tie one neck of one duplet with the other neck of the other duplet, like that.
Now, these you will tie with a neck of the other balloon.
We have this beautiful rainbow balloon. You can inflate with the hand pump or with the FoilPro® from Premium.
To add this rainbow here in our design, you can use Oasis UGlu Dashes or you can use the glue gun. Just make sure the glue gun is on a low temperature.
The first thing I will do is just cover my neck.
See the position where I want my balloon here and now I'm ready to put the glue around.
And that's it, now you have a new design for your collection.
I hope you really like this St. Patrick's design. You can follow us on Instagram at
@burtonplusBURTON. You can subscribe to our YouTube @burtonplusBURTON
Bye bye!