All right, so now up here, remember you have that headlight. Just push up on it like that
and it should come right off. Oh this one's broken.
So this headlight is broken but if you pull up on it it should come right off and then...
there you go that fender comes right off.
Hey guys, Rolando from ReveMoto. So today, we're going to be working on this 2017 Toyota Highlander
passenger side fender removal and installation of a brand new pre-painted fender from revemoto.com,
your pre-painted auto body part source, so if you guys need this fender for your vehicle go to
revemoto.com your pre-painted auto body parts source, we sell bumpers, fenders, hoods, side view mirrors
and also accessories for your vehicle tail lights, headlights, basically anything you guys need
we can get it for you, so go to revemoto.com your pre-painted auto body part source and also
this fender right here is going to be a link-up above and down below so you guys can go ahead and
purchase it so let's go and get started with this vehicle. All right, so now I have that new fender
right there put this piece back on there and right now we're just gonna line it up how we found it.
So I'm gonna go this way first slide it in first this way.
So carefully slide it in there...
This one's already broken so a little easier for me to wedge it in there.
Wow.
Okay so if you guys have a... I always have a bolt handy.
I have a bolt handy, put it in there so the fender doesn't fall.
Okay
Like that... So right now, we're not tightening anything up. We're just putting the bolts on there
so it kind of helps us since we don't have a second person to help us hold the fender.
So now that's on, I'm gonna go ahead and take a look
and how everything's lining up. So this one looks good now, it's back into place.
I'm just good on this side so now we're gonna close the door,
put a bolt right there,
put a bolt in there.
So I'm just putting all the bolts in place so I can see like everything's lined up,
and then we'll tighten it up in a few minutes here
and put the bolt on the bottom.
You can just... right here...
You know push it on a little bit line it up with the lines make sure the gaps are
good and then there's a bolt back here so we're gonna put those put that bolt back into place.
Make sure you put the right ball in there. It's a smaller bolt
so it goes right in there.
So now everything's lined up.
I like to tighten this one back here first so it doesn't keep pushing it out. So now it's that...
it's properly pushed in. I'm gonna turn that one up first.
I have to guide it, push back in.
There you go... nice that looks good.
So now I'm going to go ahead and come up here and put that bolt in this little triangle area so
that's what came on this that one back in place.
Put this bolt in there so I'm pushing it in because I want it to line up right here.
And...
I'll get my right... so now push it in.
Get it tight. There you go. All right, so we still got a lot of a little bit
more adjustments to do so this one's good. The slope is good. Now we got to put that hood down.
Now we're going to put the hood down so we can see like the alignment right here is good.
If it is then we're gonna go and tighten it up. First, make sure my bolts are in there.
Okay.
Put it all the way down.
Check it with the other side.
Yes sir, yes sir, that works. All right so now this is good, it's lined up properly and tighten it up.
Put this cover back in place oh don't forget this cover right here that goes up there.
I always forget this piece though when I do remember,
come back in place right away. Right so now we have this screw for the headlight, put that one back in...
there we place. So now it's good this one's a little bit of a gap right here because
this headlight is broken on the tab right here which happens all the time whenever a fender is
damaged, most of the time the headlight might get damaged too so go ahead and look for that if you
guys need that headlight to remember you can order at ReveMoto.com also so you order a headlight and
the fender so you have all the all the things that you need in your project all in one place.
All right, so now remember that dreaded bolt... all right bolt right there.
Let me see almost to the finish line don't give up now got that bolt right there. Go ahead.
I think that's a small one,
this one.
yes it is shorter socket.
All right, so first
go right here push this in and see what up line this up with this one right here.
You gotta put the inside bolts in first.
Clean that up all right. Now's tight, there's two of them one another one up there.
Also before we finish hit that like button,
so we know if you guys like this video, we can make more of it.
All right there we go there's another bolt right in there. So now...
Now we put this piece on. Make sure it's the right way.
Ah there we go. Now I hear that click and then we're going to put this bolt in inside here.
We're getting somewhere here.
All right so now that's in there then you remember this it's pink or red thing
you put it in there just to hold that. Clip it in there. So now the bumper should go in place.
This one won't clip into place because... there we go so this bumper is kind of pushed out a little bit
because it's a crease right here that's not making go inside but if you don't have a bumper
that's damaged it should go right in there. That is clipped on now. All right, recap so we did the top,
took the headlight and uh put the bolt on the headlight did the bracket right here
so now we're gonna go around we're gonna go ahead and see like the line and show you guys.
See how the... the line is even and whenever you guys open the door
it's not hitting that fender so that means all the bolts are lined up correctly.
We're gonna go ahead and tighten the bottom one and on the side right there.
So this one right here gonna get tightened up.
Bottom one's gonna get tightened up. There you go. That's that and let's see was that one over here?
Open that up. I believe there was one. Yep there it is.
There we go all right.
So we did all the easy parts now. It's good to go right there. Yep so this piece right here
that has all the lettering and the writing and all that stuff
goes to the... to the back going this way so put this one facing the front of the vehicle.
There we go and find those holes and clip it back into place.
and then this one right here.
There you go.
That's fine all right now we're gonna put this fender liner back into place
and that's where those little plastic pieces that we had a hard time taking off
comes into play. I'm gonna go ahead and pop them into place. I have a secondary one.
They got deformed and everything you can go ahead and get another one
at the dealership or yeah I think it's a dealership.
I think they're like five bucks or something. All right there we go. Let's see
the fender liner, we're gonna do that one last. That's it so now we can put the
yeah I'm going to put that molding back on.
All right so we're going to go ahead and put this molding back on.
So just clip it back into place like that.
Fairly easy.
Let me close the door.
Okay now I'm gonna focus on the bottom piece right here. Let's see what I'm missing.
That's in there. What's in there? I'm missing here so once I get this one
bolted back on right here it should be all right. All right so that's good to go. Let's see
underneath here,get that pushpin in there
bottom. Boom. All right do I need another one? No, that's it. All right that's good to go for now.
Then let's put this fender liner, I mean not fender liner mudguard on.
Like so.
All right
10 millimeter first. All right there we go.
Now time to find my 10 millimeter socket. All right so now we got that bolt on the 10 millimeter
bolts that we got to screw back on for the mud flap. Screw that on well extension is not necessary.
We gotta put this
oh
you put that clip in too fast let me take that pushpin out of the way.
Good to go, bottom is good to go. Fender flares.
Now we gotta reattach the fender flares. I'm gonna put those push pins back into place.
What I did was put that little pin back into place that we took the fender liner off.
I went ahead and put that bolt right here
and then I put another push pin right here and then last is going to be a
the bolt right here or screw.
All right guys, so that's how you install a 2017 Toyota Highlander passenger side it also works for
a driver-side fender. Thank you guys for watching. Hey guys I do want to thank you again for watching
our great videos. If you guys need any parts for your vehicle, the ones that you guys see in our
videos or anything else, go to revemoto.com your pre-painted auto body part source. We sell
bumpers, tail lights headlights, touch-up bottles. Everything that you need for your
vehicle, go to revemoto.com your pre-painted and accessories parts store. Also go ahead and like
subscribe and turn on your push notification for more great videos like this one. Thank you!