Hi, DIYers.
This is Michael from Alarm Grid.
And today I'm going to be showing you
how to enroll the SiXMINICT door and window contact
sensor with the Honeywell Lyric Alarm System.
The Honeywell SiXMINICT, it's an encrypted door and window
sensor that's a miniaturized version of the SiXCT.
The smaller door and window contact
is appealing to some users because it
is less noticeable on the door or window frame.
But the tradeoff is that it doesn't
have as far of a wireless range as the SiXCT, which
is a little bit larger.
We actually have the other one right here.
You can see by comparison.
The SiXMINICT is mini.
So if you want the smaller one, then this is the option.
But the range isn't as long.
The SiXCT has 300 nominal feet, and this one
has about 200 nominal feet.
But if you're using it in a smaller home,
or range isn't really an issue, you have a centralized panel,
then it really won't matter.
Just remember that obstacles, thick walls, large metal
objects, can reduce range.
There is no repeater for SiX sensors,
so you can't repeat the signal.
So that's about all you're going to get.
And also, the other tradeoff is that this one does not
have an auxiliary input.
It doesn't have a terminal block for connecting a hardwired door
and window contact, and using this as a wireless transmitter.
You can't do that with the SiXMINICT.
You only use it as a traditional door and window contact sensor.
But we're going to enroll ours today.
The first thing I'm going to do, I'm
going to open up the sensor, just
so we can get a look at the LED a little bit here.
Usually I just pop it off.
But that doesn't work-- there we go.
This side, right there.
And then we can take it off.
And we can access the CR240--
CR2450 battery.
Lithium 3 volt. You should only have
to change that every few years with regular usage.
But we see ours, right now the LED is blinking quickly,
because it's not enrolled.
So we're going to enroll ours today.
And the Lyric has a special SiX programming mode
where we can do exactly that.
So we're at the main screen of our Lyric,
and we're going to choose Security.
We're going to choose Tools.
We're going to enter in our installer code, which
ours is at the default of 4112.
And we're going to press Program.
And we're going to press the down arrow.
And then we're going to choose SiX Programming.
And now the Lyric is looking for a SiX sensor to add its system.
There are a few things you can do
to send a transmission signal.
You can-- if you're using it for the first time,
there'll be a battery tab that you can
pull to power on the sensor.
You can also press the tamper switch here.
Let's try removing the battery.
Let's do that.
So we've got a screwdriver just to pull it out there.
We didn't let it fall to the floor, which is great.
And we're going to push it back in.
And that did not power it on.
Let's try pressing the tamper button here
and see if that gets the light going.
There we go, we got the light going.
So now we just have to wait for it to show up on the Lyric.
And there we go.
We have our SiXMINICT here.
You can confirm the serial number.
We lost our sticker, actually, but if you do want to check,
then you can make sure.
But we're going to edit the zone settings now.
So we have it highlighted blue.
And we're going to click Edit.
And then because it's a contact sensor,
it gives us the option screen here.
If we were using the regular SiXCT,
we would also be able to configure the terminal block.
But we don't have that.
We just only have the option of the read switch, which
we can disable if we wanted to.
But then we really wouldn't be using the sensor.
But we'll keep ours enabled by having the circle green.
So we're going to choose Edit.
And now we're configuring the zone settings.
So the serial number, we confirmed that.
It was auto-enrolled.
It was fine.
Service read switch, that's how we want to use the sensor.
So that one's fine.
The zone descriptors serve as the name for the sensor.
And they'll also be spoken out along with the device type
if you have voice enabled on the panel.
So in this case, it would read Front Door.
And we can also do a second zone descriptor if we want to.
But let's say we wanted to add in a second zone descriptor.
And we wanted to call it Living Room.
Laundry.
Or we'll go with Laundry.
Why not?
Front Laundry, Front Laundry Door,
that's what it's going to read out
when we fault the sensor later.
So remember, it will read the device type,
so you don't need to add Front Door or Door.
That would be silly.
So it'll be Front Laundry Door.
And then we need to do the response type.
[BEEPING] The response types, how the system responds
when the sensor is faulted.
So this is a very important setting.
The most popular option, really, for a door,
it's the entry exit ones.
So those mean that if the system's armed,
that is Armed Stay or Armed Away, or even Armed Night,
and you fault the sensor, then you'll
have to disarm the system within an entry delay period,
or else the system will go into alarm mode.
So the entry delay period gives you
a chance to disarm, to set your stuff down,
to take care of what you need to do.
You only have a minute or so, but you can change the setting,
but that's a different topic.
Make sure you give yourself enough of an entry delay time.
So that's a popular one.
Perimeter is also an option.
That's commonly used for windows.
Perimeter that if the system's armed and you fault the sensor,
then it will go into immediate alarm.
You won't have a chance to disarm with the entry delay
period.
So if someone's coming and going through the window,
which isn't normal--
well, who am I going to judge?
If you use the window, that's fine.
But most people don't.
So if you set it to perimeter, and that's your window,
and then someone opens up the window
while the system's armed, it will
go into an immediate alarm.
And the system will take action by sending out a signal,
as long as you have Alarm Report enabled, right there, which
we want ours to be enabled.
So if you have Alarm Report turned off,
then that means the system won't send out
an alarm signal when this zone causes an alarm on the system.
Assuming you have the system monitored,
it can communicate with AlarmNet,
which then forwards the signal to Total Connect
and/or a central monitoring station.
Total Connect can send you an alert via text and/or email.
And the monitoring station, they have highly trained dispatchers
who will try and contact you to make sure everything's
all right.
If they don't get a response or you're not
able to provide your false alarm passcode,
then they'll send out automatic emergency dispatch
in most cases, depending on the settings on your account.
But we want to have Alarm Report enabled, in our case.
We have a chime option, which can be used just
as a little sound to let you know that the front laundry
door has been opened.
So that this can be like something, even when
your system's disarmed, it will make that sound.
Supervision-- so this sensor, regardless of
whether you have Supervision enabled or not,
it will still be sending out continuous check-in signals
with the panel.
What Supervision determines is whether or not
the panel is listening for those signals.
When you have it supervised, the panel
is going to be expecting a check-in signal every 60
minutes.
And you actually see the setting down here.
And you can't change it.
It's actually grayed out.
If I'm pressing it, nothing happens.
So we can't do anything with that.
But we can't change Supervised or Unsupervised if we want to.
But the sensor's sending out check-in signals regardless.
It's just a matter of is the system listening for them.
And if it is, then it's going to expect a response every 60
minutes.
If the system doesn't receive a check-in signal, maybe
because the sensor is out of range
or because it's been powered down
because somebody removed the battery,
then you'll get an RF Supervision loss trouble.
So in our case, we want ours to be supervised.
So we're done with all these settings.
So we'll choose Save, and we'll press Save again.
And then we see our sensor here, but we're
going to show you it in the zone settings as well.
So we're back in Programming here.
I just want to close the sensor real quick.
We have the battery right here, and we have the circular part
there.
And we just align them, and then we can just
click it into place like so.
And our sensor is closed.
And we have a magnet right here.
We have an indentation on the side of the sensor right
here to simulate the door being closed.
So right now, our door is closed.
And I'll be demonstrating opening it in a second.
But first let's go and look in our zones.
And we can see our front laundry door is on zone 3.
It's right there.
We have we have a battery signal and a signal strength as well.
So we can see that our zone is there.
Now we're going to go back to the main screen
by repeatedly pressing the arrow in the upper right
corner, and the Home button.
And we're at the main screen of the system.
And so right now our laundry, our front laundry door
is closed.
And so when I open the magnet--
when I open the door, the magnet's
going to separate from the sensor
and we'll get the fault on the system.
So let's demonstrate.
[BEEPS] Front laundry door.
There, so we have a fault at our front laundry door.
And if I go to the Security screen,
you can see that it's open right now.
Open zone number 3, front laundry.
And then if I close it, we close the door,
and we've restored it, and now we're ready to arm again.
Now, just one last time.
Let me turn it this way.
And so we're going to open up our front laundry door.
[BEEPS] Front laundry door.
And there we go.
Our zone is open and restored.
We've closed the door.
So that's how you enroll a SiXMINICT door and window
contact sensor with a Honeywell Lyric Alarm System.
If you have questions about the SiXMINICT, or about the Lyric,
or alarm monitoring in general, send an email
to support@alarmgrid.com.
If you found this video helpful, make
sure to give it a thumbs up below to like the video.
And remember to subscribe to our channel for updates
on future videos.
We hope you enjoyed the video.
Thank you.