please subscribe
and support this channel you can support by giving a comment
or give a like to the video thanks
DD-WRT client bridge setup
This setup
is not a wired connection its a wireless connection between two routers only
the router that you are trying to connect to, is the primary router
the router you are configuring, is the client bridge router
client bridge mode means, that the second router only has connections via a wired
connection
so, you just can connect by cable not wireless at all
first I strongly recommend a backup of the router settings
be sure you have a backup of the bin files, if anything goes wrong
you can restore later. Go to administration
backup
now with the setup. Go to setup basic configuration
on connection type select Disable
choose a router name
next the IP address, for example 192
168 0 2 the second IP available from the same network of the first router
the Gateway type the IP from the first router
check assign on port to switch
and disable DHCP server
now save the changes
next security
disable firewall
and click Save
next go to wireless basic settings.
On wireless mode, select client bridge
and on SSID
give the name of the first router
also the same
wireless channel of the first router
disable SSID broadcast
and make sure network configuration
is bridge
click save
now go to
wireless security
and configure it as the first router
make sure match the wireless security of the first router
choose the security mode shared keys or passwords if any
and save the changes
next go to advance settings
on the authentication type, select shared key
and save the changes
next go to status and wireless
and here you can verify the changes
you have made. On wireless status area the settings should match with the first
router
next click on site survey
the neighbors wireless networks pops up and join to the first router network
successful joined, hit continue
return automatically to the wireless basic settings, go ahead and click Apply settings
and save
now you have to change the URL adress bar
to the new IP address of the router
wait a moment and if for some
reason you can't connect again, unplug the cable from your computer
and plug it in again to renew the IP from the router
client bridge mode setup successful
now if your first rounder have access to Internet
you can return to this video and get the comment, a thumbs up and subscribe.
I hope this video was helpful, thanks