Hi. I’m Paul Atkinson, product specialist for Pro Video cameras with Canon Europe.
I am pleased to introduce you to the new professional video camcorder from Canon, the XF605,
inheriting many features from our existing range of cameras,
including the Cinema EOS line up
as well as introducing some new and exciting features.
The XF605 is designed to meet the demands of professional users,
including single operators working in news and journalism,
broadcast and documentary, as well as events.
The XF605 is a small and lightweight camcorder weighing approximately 2000 grammes,
around 600 grammes lighter than the XF705
and is approximately 10% smaller than the XF705 too.
The XF605 uses a 1 inch type CMOS sensor powered by the DIGIC DV7 image processor,
capturing stunning 4K UHD images and recording to readily available and cost-effective SD card media.
Users can capture using XF-AVC within an MXF wrapper
or MP4 sampled at 4:2:2 10-bit using H.264 compression.
Or alternatively recording MP4 files in H.265 again in 4:2:2, 10-bit.
For the first time in an XF series camera
both Long GOP and Intra-frame recording options are available.
If your project calls for capture in full HD
then you will benefit from 4K downscaling.
An oversampled Full HD image is captured thanks to the full UHD sensor readout,
this results in greater detail captured for your Full HD production.
The maximum data rate of the XF605 is 410Mbps
when recording XF-AVC.
With a 256 GB card, this gives you approximately 78 minutes of recording time,
increasing to around 142 minutes when recording MP4/H.265 at 225Mbps.
MP4/H.264 maximum data rate is 150Mbps
giving an impressive approximate recording time of 214 minutes.
The XF605 supports Dual, Relay, and Proxy recording options,
as well as enabling users to select specific recording parameters for each card.
Users can select a combination to suit their production needs,
whether it be 4K to Card A, and 2K to Card B,
or perhaps XF-AVC to Card A, and MP4 to Card B,
this versatility also includes interlaced or progressive scan options,
as well as Intra-frame and Long GOP options.
This camera has you covered.
There are also options available for frame recording and interval recording,
which is particularly useful for time lapse video creation.
The XF605 features our renowned DPAF system,
delivering accurate and responsive AF which is critical when capturing at high resolution.
Featuring for the first time in an XF series camera, is EOS iTR AF X.
This Intelligent Tracking and Recognition system, based on a deep-learning algorithm,
enables accurate face tracking, even when the subject is facing away from the camera.
We have also added Eye AF, another first for a Canon video camera.
These tools help ensure you do not miss the shot
or risk losing focus at a critical moment.
Tracking AF is available too, across the whole of the active sensor area.
The 5-axis image stabilisation system uses a combination of optical
and electronic stabilisation which is particularly effective
when shooting hand-held in fast moving and dynamic situations.
Built in ND filters allow you to control exposure
and depth of field to suit environmental or creative needs.
3 glass, turret mounted ND filters with values of 1/4, 1/16 or 1/64 ND are available.
Low light imaging is also improved.
The sensor is already capable of low light, low noise recording,
but an enhanced IR gives an impressive IR recording performance.
A Gain Boost option to increase sensitivity is available
for conventional shooting in low light.
The XF605 features an L Class 15x optical zoom lens,
and allows for direct control of Zoom, Focus, and Iris
thanks to the 3 dedicated dials.
30x zoom is available when shooting in Full HD,
offering users even greater reach.
As mentioned earlier, image capture is available
at up to 422 10-bit up to 60P.
But 120P is also available in Full HD,
also at 422 10-bit with audio recorded to a separate file.
Canon's colour science is well regarded and the XF605
features the same colour matrix as other cameras from Canon,
making the matching of footage with Cinema EOS and other cameras
even easier, saving you time in post production.
LUTS can make Log or flat footage come to life by adding contrast or a specific style.
Users can now import their own Look Files,
and these can be applied directly to the video being captured,
as well as the SDI and HDMI outputs, allowing for more accurate monitoring.
Direct HDR recording in both PQ and HLG are available,
as is Canon Log 3, plus other presets
that help match with other cameras.
The XF605 offers a range of connection options,
suitable for a variety of production needs.
12G-SDI as well as HDMI are available,
along with Genlock/Sync and Timecode options.
Wi-Fi is built in and ethernet connection is available too.
USB C connection brings a range of new features,
whether it be when utilising the camera for video calls thanks to the UVC protocol,
connecting to the new CTM App, PTP connectivity,
or when utilising the Canon GP-E2 GPS unit.
The XF605 offers another first for our camcorders,
a new multi-function shoe allowing for the utilisation
of a new generation of accessories for Canon.
The Content Transfer Mobile, or CTM App,
is a useful tool especially for journalists.
This App is currently designed for use on iPhones, and can connect to the XF605
over Wi-Fi or via USB-C.
The CTM App allows access to video and audio files as well as news metadata.
XF605 is compliant with the widely used NewsML-G2 standard,
which is a cost-effective and flexible mechanism for managing and
packaging news metadata and material in a structured way.
Information can be pre-loaded or updated in the field using the CTM App.
Alternatively, edits can be made and sent to the camera
via the CTM App such as story name, keywords or tags,
descriptions, categories as well as restrictions and copyright information.
When material arrives back at the production hub
this information provides the news and video editors with quick access
to the right shot and align with material from other sources using the same system.
File Transfer is also available using the CTM App,
giving the ability to transfer MP4 video, WAV audio and XML metadata files
using a smartphone connected via Wi-Fi or USB.
Files are saved to the phone then the
CTM App manages the transfer of the files.
This way proxy files can reach the newsroom or studio quickly.
Next, PTP Connection. Using this option, you can import MP4 video files
onto a computer using standard applications, such as file transfer commands.
Video Output enables the camera to use the UVC protocol.
This allows the camera to function as a Webcam
when connected to a suitable PC or MAC computer.
Recently, Canon released a range of PTZ,
or Pan, Tilt, Zoom cameras along with a new remote controller.
We also released firmware updates enabling existing products to be part of this system,
allowing the cameras to be controlled as part of a
multiple camera set up using the RC-IP 100 control deck.
The XF605 is equipped with this feature being compliant with the Canon NU protocol.
Remote control is available via the Remote 2 connection
using the RC-IP100 or the RC-V100 controller using the Remote 1 or Remote 2 connection.
Further flexibility is available using the Wi-Fi remote option
using our browser based interface,
further adding to the versatility of this camera in a range of shooting scenarios.
For IP streaming, the XF605 supports UDP, RTP, and RTP+FEC.
You can also record internally while outputting via IP
at up to UHD, giving a high resolution option for later use.
This versatility make the XF605 a valuable asset
in telling the stories you want to share.
With the release of the XF605, Canon has introduced to the market
our most powerful and versatile professional camcorder yet.
Designed for use in the most demanding situations
where getting the shot is something you cannot compromise.
You need the best tool for the job.
For further information on the XF605,
as well as the whole range of Canon Pro video cameras,
Cinema EOS cameras, lenses and more
please visit the Canon website or visit your local dealer.
Thank you.