Hey everyone and welcome to the club. Today
I'll be showing you how to draw Dialga
from Pokemon. So, this will be one of our
most complex Pokemon drawings so if we go
too fast
you always pause the video and get
caught up. Let's get started in the head
area we dropped angled line for the brow
area going from the outside coming down
now for here going to that little Ridge
on the side here so from this point
would come down an angle now from this
point want to curl up the bottom of the
I you're going to curve upwards now
we're stuck in the iris and pupil
underneath so we're going to a
half-circle starting up here
circle around now in the middle of you
want to a smaller circle for the pupil
let's go ahead and color the inside of
the eye in black
it's working way down the side of the
face with the horn so from here going to
curve down here there's little point
that comes down this way so from here
will curve down and slightly backwards
if you're going to trace our way back up
the side of the head so if you're going
to go up there going to angle outwards
going to come up just beside the I just
up in an angle like that here let's draw
a little horn that comes up this way so
from the edge of the i'm going to go up
in an angle towards the right going
upwards going to pull that back so it
gets a little bit wider as it come back
this way you want to show a little bit
of the edge so we're going to start the
tip just kind of taper outwards just
going to the side here and then with a
short little angle line just pull it
down going to draw on the front of the
face so from here going to curve
outwards towards the right now we draw
in the bottom lip so from this point
we're going to occur across and just
kind of overlap a little bit will pull
this back in the bottom of the jaw just
putting that in behind horn and went to
a little trim up here looker like that
he's got two little lines across the
face so right up here just going to draw
two angled lines curving across like
that is draw the ridge of the brow so
behind this horn would occur across to
the front now from here is going to pull
this straight down to the top of that
lip there
let's continue this horn that goes back
to the back of the head here so we're
going to is going to start from this
point going to angle it backwards from
up here we go up at an angle little
steeper now we make our way to the back
of the horn so going to draw a straight
line that goes all the way back like
that
now hear this little bit of a chisel so
we're just going to draw an angle line
coming down now from here moniker down
towards the side of the head from this
point we're going to curve down to write
about their want connected to that point
with a straight line is drawn the top of
the head so right up here going to a
curve going forward to read about there
now from this point want to make our way
to the top of the head here we're going
to a hard turn
curving behind the horn and it will
continue along the forehead now in the
back here going to try to take this
little point here and just duplicated in
the back we see the back side right here
we're doing angle line little chisel
point and pull that forward we're also
going to see this horn in the back as
well so right up here on the forehead go
up and then pull that back down
let's continue the back of the head here
so right up here is going to angle
outwards going to pull this back down
with occur comes in like that we're
gonna reverse the curve coming to the
back of the neck to write about their
wanna leave a gap in the back here let's
continue this jawline just passed this
horn so we can continue this curve just
slightly back like that now in the
center of the neck this little detail
that comes down so we start at the
bottom here this line curving down an
angle so it's coming coming down towards
the left under here would occur in so
start the pitch in with the bottom and
went to a little point must go to the
shape at the bottom
let's go down the front of the neck down
towards the chest piece from this point
going to do a little overlap incur all
the way down to the front of the chest
piece coming forward like that
now this is a little gem in the front
here so an angle back and we want to
draw a little detail a little facet in
the front so from that point we're going
to I angled line going across can pull
this backwards like that
come down with a straight line we're
going to connect to that point like so
on these two points we just want to draw
a little bit of a line little angle line
going out so it's going outwards this
way let's draw in the chest piece so
just up here about halfway down the neck
we've got an angle line going across
like that come down in a diagonal line
now we're gonna have to draw one of the
blades that comes out this way so let's
start by going up an angle now we want
to come down towards a sort of flatpoint
going back take this point we're just
going to draw a little flat and now
we're gonna pull this back we do the
same as we did not talk to slip
over so from the top come down so it
starts to get wider and then we can pull
that in let's take these two points and
connected to a center point down here so
for the top come in an angle and then
from the bottom will come down towards
that same point down here just gonna
angle this line down we're going to do
one more little piece coming out this
way to go out and we'll pull that back
in towards the stone coming in like that
will take this point and connected along
the bottom from here we're going to just
draw a little overlap so gonna step back
coming down at an angle now this is
gonna work its way down towards the
bottom of the body so right here come
down angle from this point we're going
to come in so it starts to come in a
little bit narrower flatten it out the
straight line across the bottom now
these two points going to come up to a
center point going up and then down on
the right side going to see a little bit
of this blade on the backside here so
we're going to start up here along the
neck going up flatten it out and we'll
just tapered outward so it gets a little
bit wider as it comes back towards the
chest piece up here in this corner right
here is going to draw a curve going in
understanding towards that point there
now that we have the front of the body
we can work our way through the back so
from this point in the next we're going
to curve back so the back kind of curve
downwards and over towards the left so
from here we're going to curve back it's
going to continue just passed this blade
to read about their this sad little
spines in the back so long the neck just
draw an angle line first we draw a sharp
point going up to a point now this is
going to come back down to leave a
little gap right here we can occur just
what that curve of the back of the neck
here we're going to go out again doing
one more blade up to a point and i'm
going to pull that back in now this is
going to take her across the back so
we're going behind that blade and just
sort of vanished off and back like that
let's draw the front leg here so right
here we're gonna draw intersecting curb
right from the top curve
out going to overlap these little blade
Claus show up here to step up and curve
down to the front now we're going
straight down the line to worry about
they want to go a little bit higher than
the front and connect those two points
with a straight line we draw the back of
the leg here so right up here going to
draw her coming in behind there we draw
the centerplate here so from this point
the bottom go up an angle and we're
going to come down an angle at the same
length to come down to a center point
down the middle then back up let's go on
the backlight here so again going to
take this blade is flip it over
start from the top curve down towards
that point there and we'll hang ghal
backwards now up here there's little
radicals around the legs so we started
the top again come down with short angle
will curb back like that from here it's
going to curve up and back for the back
of the leg now we want to show the
little band that goes around the leg
here so we started that quite go up
angle down a straight line coming down
we're gonna turn this back slightly
I want to take that point and make our
way to that point we're just going to
curve to the tip of the blade now for
the back of like you're going to step
about halfway along this line curving
back and curving it forward this little
decorative detail here so we start and
right in the middle between these two
blade tips and strong v from the left
side curve up for the rights are going
to Curt in to start pinching in that
will connect that with a straight line
let's draw the leg in the back here so
we start right from this point in the
chest plate and draw an angled line
coming across now we draw what we did
here and draw a curve going in the front
right like that go up with a straight
line now we're going to draw the front
of the blades are going to curve across
like that
going to go back up here step up in the
corner angle it down straight down and
then curve it forward now this line
we're going to continue going straight
down like that connect those two points
with curve going forward when they're in
the middle blade in the Senate here so
right up here
go up go down an angle and tuck this in
behind the front blade now for the back
one here we want to simply take this tip
go up go across the curve the front of
the leg up to here go up an angle and
will occur this up in behind the chest
like that i'm going to separate this
toast right here is going to curve down
the back of the heel from this corner is
step towards the right come down the
curve and draw a straight line in behind
there
let's draw the same detail writing this
leg here so we start with AV we take
this point left turn it up and then on
the right will curve it up let's move to
the back and draw the fan blades over
here so we start at the base with a
cursor over this line is going to
intersect it with a current like that
from here this is going to work its way
towards the hind case of them here to go
across and then down let's go to the
back here from this point we're just
going to draw a curve going in so it's
almost like coming in towards each other
now we can draw the fan blades so from
this point we go up in an angle and then
we're gonna go up so we're going to a
hard turn going up to take the tip and
just flatten it out with a short line
going to come down in the opposite
direction so coming down like this it's
almost mirroring what we have on the
left side coming down to the bottom and
then just flattening out the bottom for
this point we're just going to draw an
angle line going up we're going to
repeat this pattern on the inside here
so we started here we go a little bit
longer flat out the top now again we're
going to come down in the opposite
direction coming down i'm going to come
down to the bottom here so from this
point on the left
come in and on the right going to leave
a gap at the bottom just want to flatten
it out with a straight line now again
we're going to find this out so we're
going to be working on way this way so
from this point we're going to go across
in a slight angle so here we're gonna go
up again
flatten out the top come down an angle
and then these two points going to come
down to a flattened centerpoint now
because we're sort of curving this way
we're going to just flattens out
straight
let's do another one here in this corner
we go out straight we go up so now
because its turn you want to show it to
show that's coming this way
so from this point I'm going to angle
down now we're not going to draw this so
I'm going to go up in an angle and then
go up this way going up flatten out the
top now this is going to tuck in behind
that plate
they're coming in like that for the
final blade was going to start from this
point going out in an angle come down
with a short line going to curve this
back in behind the base from here we're
going to curb down let's go back to the
high here so we're going to the high leg
so this point want to curve it outwards
declaring it out you want to come down
with short straight line coming down
like that we want to basically take this
and duplicate it in the back here so
starting at this point here when occur
in go up an angle and then we're going
to come straight down to write about
their so matching up the height from
this point we're going to angle out
we're going to pull this back into a me
towards the tip really the gap right
here one daughter little band so
starting up here we go up angle down
down the straight line and curve it to
that point
let's draw a center piece right here so
from this corner and go up and then down
so again we're just duplicate what we
have here at the bottom
we're just going to draw them fee from
this corner going to go up against
taking this and flipping it over going
up we're going to come down the shore
tangle
from the bottom going to angle forward
going out this way again from the tip
which many towards that tip up there but
we're gonna be the space now with this
band we're going to duplicate this we're
gonna go across from here i want to draw
on the front of the leg
we're just gonna curve up like that in
the bottom of the body you see the body
comes across this we're going to step
down doing over that and talk this in
behind the front leg go back here angle
line straight down and curve that in
let's draw the bottoms of the feet so
right here goes straight down her that
behind that blade from here just want to
draw little bit of the front part of the
leg so for the back like you're just
going to see a little bit of it so right
up here to draw Kurt going in behind the
front leg and at the front just going to
see one of the claws coming out i'm
going to pull that back with a straight
angle line and then right up here it's
going to curve down to that corner
let's draw a little detail in the body
here so right up here i'm going to meet
this fan blades and curved backwards and
draw a sort of an angle V now this is
going to curve up so pitching in to rent
out there now we're going to come in the
opposite direction and tuck this in
behind the front leg then up here which
one draw a curve is falling along and
just coming inwards like that
the final step is the tail so right here
where the blades meet the back to draw
her little habit and then up to take
this tip and just tape it out so it gets
thicker as you come in towards the body
kind of hurting in like that and at the
tip to start the bottom angle in the top
will angle in we're going to follow us
along the tail the same curve going back
just getting a little bit thicker as a
comin in
let's add a little detail up here so up
here we're going to curve down and I do
a hard turn underneath that little side
plate if you want to have a little
wrinkle in the shoulder here so right up
here switch all the curve like that and
that's pretty much it
there we have it there's Dialga from
Pokemon.
I hope you enjoyed this lesson make sure
you check out our Pokemon playlist we add a new
character every tuesday thanks for
watching we'll see you soon